helloworld_rx
examples_pico/helloworld_rx.cpp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80 | /**
* Simplest possible example of using RF24Network,
*
* RECEIVER NODE
* Listens for messages from the transmitter and prints them out.
*/
#include "pico/stdlib.h" // printf(), sleep_ms(), to_ms_since_boot(), get_absolute_time()
#include <tusb.h> // tud_cdc_connected()
#include <RF24.h> // RF24 radio object
#include <RF24Network.h> // RF24Network network object
#include "defaultPins.h" // board presumptive default pin numbers for CE_PIN and CSN_PIN
// instantiate an object for the nRF24L01 transceiver
RF24 radio(CE_PIN, CSN_PIN);
RF24Network network(radio);
// Address of our node in Octal format
const uint16_t this_node = 00;
// Address of the other node in Octal format (01, 021, etc)
const uint16_t other_node = 01;
struct payload_t
{ // Structure of our payload
unsigned long ms;
unsigned long counter;
};
bool setup()
{
// wait here until the CDC ACM (serial port emulation) is connected
while (!tud_cdc_connected()) {
sleep_ms(10);
}
// initialize the transceiver on the SPI bus
if (!radio.begin()) {
printf("radio hardware is not responding!!\n");
return false;
}
radio.setChannel(90);
network.begin(/*node address*/ this_node);
// print example's introductory prompt
printf("RF24Network/examples_pico/helloworld_rx\n");
// For debugging info
// radio.printDetails(); // (smaller) function that prints raw register values
// radio.printPrettyDetails(); // (larger) function that prints human readable data
return true;
} // setup
void loop()
{
network.update();
while (network.available()) { // Is there anything ready for us?
// If so, grab it and print it out
RF24NetworkHeader header;
payload_t payload;
network.read(header, &payload, sizeof(payload));
printf("Received payload: counter=%lu, origin timestamp=%lu\n", payload.counter, payload.ms);
}
}
int main()
{
stdio_init_all(); // init necessary IO for the RP2040
while (!setup()) { // if radio.begin() failed
// hold program in infinite attempts to initialize radio
}
while (true) {
loop();
}
return 0; // we will never reach this
}
|